Heavy duty crawler mounted hydraulic DTH rock blasting quarry and mining drilling rig machine for sales
>> Characteristics of the drilling rig
>> The hydraulic feed and rotary head put out the biggest feeding force and largest rotary torque, which makes it more suitable for operation in complex worksites.
>> The compressor equipped for the rig is smaller and cheaper than that one the air rig equipped, along with the best price-performance ratio than air rig.
>> The Hydraulic track oscillation makes it more suitable to drill in any rough terrain.
>> The carriage with rollers provides for minimal wear to the drill guide.
>> The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide tilt and guide dump.
>> The diesel engine and main hydraulic parts adopt imported products or famous domestic brand.
>> The special compensation device makes a full protection of drill rod threads.
>> Introduction of the drilling rig
| JC860 hydraulic down-hole drill is a multi-functional drill rig driven by internal combustion engine, the drilling power was provided by hydraulic system except for impacting and the hole cleaning wind. It is convenient and efficient to operate. JC860 DTH drilling rig is the best replacement for traditional pneumatic drills in most operation. The drill is compact in structure, simple in operation, light in total weight. JC860 hydraulic crawler drilling rig is widely used for blast-hole drilling in the mines and quarries. It is also used for anchor in road, railway, power station, civil engineering and building etc. The Rugged track was driven by hydraulic motor with high traveling ability.The feed and rotary head were driven by hydraulic motor, therefore, the air and oil consumption and total drilling cost are lower. |  |
>> Specification of the drilling rig
| Specification | Unit | JC860 |
| Drilling Specification |
| Rock Hardness | F=6-20 |
| Hole Diameter | mm | 90-152 |
| Hole Depth | m | 40 |
| Drilling Rod Diameter | mm | 60,76,89 |
| Rotary Head |
| Rotation Torque | Nm | 2650 |
| Rotation Speed(Normal and Fast) | rpm | 0-82/0-112 |
| Feeding System |
| Max. Feed force | KN | 25 |
| Max. Lifting force | KN | 30 |
| Max. Feed Speed | M/min | 15 |
| Max. Lifting Speed | M/min | 15 |
| Boom&Guide |
| Max Swing of Boom | ° | 45° left / 45° right |
| Max Dump of Boom | ° | up60 down20 |
| Max Swing of Mast | ° | 30(L) / 91(R) or91(L) / 30(R) |
| Max Dump of Mast | ° | 180 |
| Feed Stroke | m | 3.2 |
| Engine |
| Manufacturer | | YUCHAI |
| Rated Horse power | Kw | 63 |
| Type | | 4Cylinder,water cooling |
| Air Compressor demand |
| Air Consumption | M³/min | 11.3-21m2/min(1.4-2.4 Mpa) |
| Compressor Type | Rotary Screw/Movable |
| Dust Collector |
| Dry/Wet | | Optional |
| General Specification |
| Max. Travel Speed(Slow/Fast) | Km/h | 2/3 |
| Gradeability | ° | 24 |
| Net Weight | kgs | 5500 |
| Shipping Dimension(L*W*H) | mm | 6000*2000*2480 |
| Ground Clearance | mm | 252 |
>> Our Service
| >> Pre-sale service Acting as a good adviser, our well-trained sales groups and professional technical team propose most rational solutions for our valued client as per practical project requirement. >> Select suitable model & matched equipment. >> Strong technical support. Reply clients' questions within 24 hours. | >> Service During Sales We have responsible team from raw material to finished products, and guarantee 100% pass rate. >> Design and manufacture products basis of client's special requirement >> Inspect each machine & matched accessories strictly before delivery >> Timely inform client of production progress. | >> After Sales Service We're always with you in after-sale service. >> We can arrange related after-sales representatives for debugging and training at worksite when starting up. >> E-mail, call or door-to-door service in later using. |
>> Related Products
https://cnjctech.en.alibaba.com/productgrouplist-221511540/DTH_Drilling_Rig.html?spm=a2700.shop_index.88.21
Product Tags:
|
|
Heavy Duty 63Kw Rock Drill Rig Crawler Mounted Hydraulic Dth Images
|
